The building formwork is made of panels and a support system, the panels are used to shape the concrete, the support systems are the structural parts that stabilize the panel position and bear the upper load. The commonly used specifications: 1.915mm-1830mm thickness:14mm-18mm. 2. 1220mm-2440mm thickness:16mm-20mm.
Material requirements:
1. The base formwork is pine board and the thickness of the ground beam side board is 20mm.
2. The bottom formwork of the main beam is made of pine board, its thickness is 40mm and the column formwork and floor formwork are made of machine-made wood formwork with a thickness of 12mm.
3. The support system is made of fir logs with the diameter that not less than 70mm and the pull connection is made of small square wood with a size of 400×500mm, of which the bottom support system is steel pipe support.
4. The wood formwork and supporting system shall not be brittle, easily distorted and deformed by moisture.
ZMADTO Plywood Co.Ltd. is professional manufacture in plywood. We supplier all kind of film faced plywood, particle board, MDF board in all kinds and size, if you have any require, welcome to call us.
