1. In the early stage of purchase, try to buy film faced plywood of qualified quality. Although the investment of film faced plywood is a little higher, it reduces the phenomenon of mold expansion and also reduces the subsequent trouble caused by mold expansion.
2. Managers should carefully check whether the reinforcement methods and measures are in place after the film faced plywood is supported and before pouring. After the mold expansion occurs, the management personnel should analyze the cause with the workers, find out the omissions, and avoid the same reason for mold expansion again.
3. The carpenter must take care of the film faced plywood during the whole process of pouring the concrete, and immediately coordinate with the laborer if the problem is found to avoid serious mold raising problems.
4. Vertical components such as 4-pillars and shear walls must be well constructed, and the pouring speed must be strictly controlled during the film faced plywood construction. If it is found that the expansion mold is running out of slurry, it should be reinforced in time.
ZMADTO Plywood Co.Ltd is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.
