At the beginning, the building construction party chose film faced plywood mainly because it could save the plastering procedure. After the construction, it was found that the quality of the formwork was good, smooth, and the whole was smoother after removal. After the demolition, the next construction process can be carried out directly, which can save about 30% of the total construction period. Moreover, within a limited number of uses, it can be recycled and reused.
Of course, in modern building construction, traditional templates have been abandoned, and film faced plywood has been selected instead. The key point is to see the advantages of film faced plywood.
1. Light weight, more suitable for use in high-rise buildings and bridge construction.
2. Larger format, which can reduce the number of seams to improve the work efficiency of the mold support.
3. During the operation process, there are no problems such as deformation, warpage, cracking, etc., and the water resistance is very good. Even if it is boiled in boiling water, it will not open the glue. The strength is good, the cycle time of the template is high, and the service life is longer.
4. After the construction is finished, it is easier to do the demoulding process. Use fair-faced concrete to pour the surface of the object, which looks more beautiful and smooth, reduces the secondary plastering process of the wall operation, and can also directly do veneer decoration to reduce and shorten the construction period.
5. High corrosion resistance, no need to worry about contaminating concrete, good thermal insulation performance, which is conducive to winter construction. The surface can be used as a template for the curved plane. It is precisely because film faced plywood has a series of advantages in use, construction companies have abandoned traditional templates and changed to film faced plywood with better practicality. It is worth noting that it also meets the call for green and environmental protection required by building construction.
ZMADTO Plywood Co.Ltd is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.
