When making film faced plywood, high-quality solid wood veneer or technical wood is generally used as the fabric, which requires cold pressing, hot pressing, sanding, and health preservation.
If you want to glue the film faced plywood, you must first remove the dust on it and keep it clean. Then it should be noted that the temperature of the glue should be controlled between 20-30 degrees Celsius. If the temperature is lower, the curing time required will increase. When applying glue, pay attention to the tools must be clean, reduce the operating time, and avoid excessive aging time. At the same time, in this process, it is also necessary to ensure that the glue is evenly applied and not missed, so as to ensure the quality of the glue.
High-quality film faced plywood can usually be used to make packing boxes. When gluing the lid of the box, it can be glued manually or mechanically. Generally, adhesive self-adhesive tape is used to glue the lid of the box. The seams, so as to ensure its quality.
ZMADTO Plywood Co.Ltd is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.
