Film faced plywood are widely used in construction, but the quality of film faced plywood are different. Good film faced plywood have higher cost performance and very good stability in use. But how to choose high quality film faced plywood? We will tell you five points to make quickly choose.
1. The color of the surface of the film faced plywood. The color of high quality plywood is natural, and the wood grain on the surface is clear. If the paint on the surface is thicker, you must pay attention. Because the manufacturer deliberately accentuates the color in order to cover up the defects on the surface.
2. Checking the surface texture, which is a very important point to check the quality. The surface texture of a good-quality film faced plywood is natural and beautiful. On the contrary, if the quality is poor, the surface texture will be messy and very ugly.
3. Checking the cracks on the surface. There are no cracks on the surface of good-quality film faced plywood. Some low-end products have small cracks on the surface, which will not affect its use. The cracks penetrate the texture and are poor quality.
4. Checking if there are knots on the surface. The knots can be divided into slip knots and dead knots. Generally, wood will have some slip knots. This has no effect on the use of building templates, but if it is dead knots, it will have an effect. It will have a certain impact on its use.
5. Checking the pressure of the film faced plywood, the ranges from 14mpa to 20mpa.
