Cylindrical film faced plywood is very common in construction now. And what should to pay attention to on hoisting?
1. A 3-meter-long steel pipe must be added while hoisting the plywood, and then the tower crane cable shall be passed through the steel pipe. This is to protect the cylindrical film faced plywood from damage by the cable and ensure the safety of the hoisting.
2. Tied firmly before it can be hoisted, to ensure safety.
3. Placing the plywood neatly in a flat and dry place to prevent the construction round formwork product from being damp or the ground is uneven and the film outside the formwork is damaged.
4. Try to avoid hoisting more than two pieces cylindrical film faced plywood at a time. Lifting should adhere to the "ten no-hanging" safe rules.
5. Before lifting the cylindrical film faced plywood, check whether there are hoop or screws and other accessories. To prevent the accessories from falling in mid-air.
