In the construction industry, every small difference may lead to the failure of the entire project, and the Plywood is a very important part. The correct selection of the Plywood is as follows:
1. The construction of beam and column structure should adopt medium-sized composite building template. Due to the different cross-sections of beams and columns, it is not suitable to use multilayer cutting.
2. The wall form can be used together with the medium-sized composite building template. Due to the uniform requirements of the same type of high-rise building group, the medium-sized composite Plywood helps to ensure a high utilization rate and turnover rate.
3. Ultra-high core pipe-high-rise buildings or high-rise buildings should use hydraulic climbing formwork. The climbing mold process combines the advantages of large-scale Plywood and sliding Plywood. It can be upgraded layer by layer, with fast construction speed, fast construction speed, space saving and tower crane. High-altitude operation, no scaffolding, construction, especially suitable for the construction of concrete inner cylinders.
4. It is recommended to use the whole multi-layer board for the floor building Plywood, and use the phenolic coating 12~16MM thick multi-layer building Plywood. After repeated use of the building Plywood, the edge is damaged, and it must be cut in time to ensure that the edge of the multilayer board is flat.
ZMADTO Plywood Co.Ltd is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.
