The plywood of ZMADTO Plywood Co. Ltd is used a lot in the construction site because it can speed up the construction progress. At the same time, in order to improve the safety of the installation, we have summarized 5 precautions for plywood installation. Hope everyone will take safety measures before installation to avoid accidents.
1. The inside of the plywood should be cleaned. In order to clear the interior of the building formwork, a cleaning port should be left.
2. When supporting plywood, the embedded parts and reserved holes should not be left, the size should meet the requirements, the installation should be firm, and if there is any deviation, it should meet the acceptance regulations.
3. The plywood should be brushed with a release agent. When brushing, choose an oily release agent that will not affect the structure and hinder the construction of the decoration project. And when brushing, it must not contaminate the steel.
4. If it is a multi-layer cast-in-place structure, the upper plywood and bracket must be supported on the lower floor.
5. The joints of the plywood should not leak grout, if it leaks, it will cause the appearance of the concrete honeycomb pockmark, which will affect the quality.
ZMADTO Plywood Co.Ltd is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.
