Today we will take a look at the instructions for the use of cylindrical film faced plywood reinforced steel belts. First of all, the cylindrical film faced plywood is composed of three parts: the panel, the supporting structure and the connectors. The plate is the bearing plate that directly contacts the fresh concrete. The supporting structure is a temporary structure supporting the panel, concrete and construction load, which can ensure the solid combination of the cylindrical film faced plywood structure. The connector is an accessory that connects the panel to the supporting structure. In short, the use of cylindrical film faced plywood with the reinforced steel belt can achieve the most stable. The existence of the reinforced steel belt makes the cylindrical film faced plywood more useful. Its operation is far superior to that of the traditional steel formwork. The following are methods for using the reinforced steel belt of cylindrical film faced plywood:
1. The two ends of the steel strip are respectively bent into the size of a fixed square iron block, and the square iron block is wrapped in the steel strip;
2. Weld the fixed steel strip and square iron block together by spot welding;
3. Fasten the two ends of the steel belt together by fixing bolts and nuts. The presence of reinforced steel strips makes the use of cylindrical film faced plywood more skillful. The reinforcement of cylindrical wood formwork is difficult, but the emergence of reinforced steel strips makes the reinforcement of cylindrical film faced plywood much easier.
ZMADTO Plywood Co.Ltd is focus on construction plywood & wood formwork product. Our factory was established in 1993 and covers an area of 240,000 square meters with an average daily output of more 30,000 pcs plywood. Besides, the factory has more than 200 advanced equipment. After years of continuous development, it has become a leading company in the international wood formwork industry and exported to more than 20 countries around the world.
